Mircom LT-945, Руководство пользователя

Страница: 15 / 40

QX-5000 Windows Configuration Utility User Guide
11
Opening a File
1. Select File-->Open from the main menu. If there is a file that is already open and it has been changed, you will
be prompted to save the changes before proceeding.The Open Configuration Window displays.
2. Navigate through the directories to locate the desired file.
3. Select the file name, then click Open.
Saving a File
Select File --> Save from the main menu to save the current file.
Select File-->Save As from the main menu to save the current file with a different file name.
Before saving, the utility will validate the configuration and will not save it if there are errors. The Save option will
only be enabled if the loaded file has been changed.
Reloading a File
The reload option allows you to restore a job configuration to the last time you saved it. This will overwrite any
current changes.To reload, select
File-->Reload from the main menu.
Changing the Job Name and Description
You can change the job name and description by selecting File-->Properties from the main menu. The
Configuration File Properties window opens (see previous page). From here you can change the name of the job
and the job description.
Validating the Job Configuration
When you save a job configuration, transmit it to the panel, or generate the components summary report, the
configuration utility will validate the data to ensure its integrity. The utility will not perform the requested operation if
the validation fails. You can also run the validation test manually by selecting
Tools-->Validate from the main menu.
The validation test goes through several checks:
• Ensures all inputs are using valid (existing) zone switches.
• Ensures all QIF-1000 IDs are contiguous and that there is at least two of them: one local and one remote.
• Ensures that, if a QDV-1000 is installed and the alarm pre-tone is enabled, QDV Channel-4 Part-1 has a
message that is set to the maximum value repeat time (255). (see
Advanced Options
on page 19 for more
information).
Copying and Pasting Lists to a Text Editor
To copy list information to a text editor (e.g. Notepad),
1. Select the desired configuration category from the left pane.
2. Select the desired list items.
• To copy all listed items, un-select all selected items by clicking the white space below the zones list.
• To copy specific list items, SHIFT + click or CTRL + click the desired items from the list.
3. Select Edit-->Copy from the main menu.
4. Paste the text into any text editor. Most text editors allow you to paste by selecting Edit-->Paste from the main
menu. To best view the report, use a fixed-width font like “Courier” or “FixedSys”.
Note:
To open an old version configuration file (has the extension .LDB), select All Files from the Files of
type list at the bottom of the Open Configuration Window, then select the required file. Click Open to
continue.
Note:
Changing the name in the Configuration File Properties window will not change the name of the
configuration file (the .QX5 file) (see the screen shot on the previous page for details).
firealarmresources.com