www.CondoSecure.com
LT-1068 Rev.0
MCS-2010 Security Keypad Instructions
To Turn on the Security System:
Press
Arm
button.
To Turn off the Security System:
Enter your 4-digit code
Press your 4-digit code again to reset the ‘
STATUS
’ light if it is on, indicating Alarm Memory.
To Change Master Code:
Press ‘
77
’ then enter your current code.
The unit will make one long beep.
Enter four new numbers.
Press ‘
ARM
’ to enter or press ‘
EMERG
’ to cancel.
If a correct code is entered and set the unit will emit 2 long beeps. (1 if canceled)
NOTE: this must be completed within 60 seconds or the command will cancel automatically.
To Change AUX. Code:
Press ‘66’ then enter your current MASTER code.
The unit will make one long beep.
Enter four new numbers.
Press ‘
ARM
’ to enter or press ‘
EMERG
’ to cancel.
If a correct code is entered and set the unit will emit 2 long beeps. (1 if canceled)
(You must know the MASTER code to change the AUX code)
NOTE: this must be completed within 60 seconds or the command will cancel automatically.
To Change Entry/Exit Times:
Press ’
55
’ then enter your current MASTER code.
The unit will emit one long beep.
Enter the two digit ENTRY time in seconds.
Enter the two digit EXIT time in seconds.
Press ‘
ARM
’ to enter or press ‘
EMERG
’ to cancel.
If a correct times are entered and set the unit will emit 2 long beeps. (1 if canceled)
(You must know the MASTER code to change the entry/exit times)
NOTE: this must be completed within 60 seconds or the command will cancel automatically.
