▲
Power input bus is red wire, when all the circuit wiring must be
connected correctly,only can connect this power red wire.
▲
Camera to be correct, the wiring can not take the wrong wire or
short-circuit, or else they will burn with the host camera.
▲
Infrared camera lights power wires (red, black) and the camera's
power wires (red, black) to be received together With the power
supply Box is negative.
3-5 The function and rejoining method of
all
kind of recorder wire
《
Host part
》
06
2) Setup time
1) To enter "Date Time" menu interface, through the
button
to select the 'set-up time' .According to the "OK" button to enter the
“time set menu “(Figure 26), with the left/right button to select the
hour
、
min,and with the
buttom to setup the hour
、
min
scores.
up/ down
up/ down
Figure 26
1) Enter into the Date Time menu interface, through the
button to select the "date formatted". According to the "OK" button
to enter the
setup time menu, use the up/ down button to set the
date format.
"
"
up/ down
(3) Setup date format
3
Setup the display of video recorder
1) First insert the USB key on the host , make
the host at the manual state,,after over 2 0
seconds ,then press the "Power"button
again reboot the system,return to the main
interface(Figure 13) then press the
left/right button to select 'set', according to
the "OK" button to enter 'set menu' ,and
then through the up/ down button to select
'show' (Figure 27).
Figure 27
2)Press the OK to 'menu display' (Figure28)
in the 'menu display’ were 'LCD', 'PAL',
'NTSC' three display mode, ( 'LCD' is the
model of the host own 2. 5-inch liquid
crystal display screen, 'PAL' external model
is the P-screen display, 'NTSC' external
model is the N-screen display), through the
up/ down button to set the display mode
.
"
"
Figure 28
2) Press the "power" button off affter setup, the normal shutdown
interface settings have been saved, and then startup to check
whether there have set up to preserve.
15
A
、
The Red Wire(the power of positive)
Function: The normal use of the total input power wire’s positive
for machine , the operating voltage 12 V -36 V.
Connection: Access only regular-power, that is the vehicle battery
positive electrode.
B
、
The Blue Wire(the power of negative)
Function:The normal use of the total input power wire’s negative
for machine.
Connection: The only grounded of vehicle, that is the vehicle battery
negative or the ground wire of vehicle.
C
、
The Purple Wire(ignition wire)
Function:The machine could startup and enter to the surveillance
state but don’t video ,the operating voltage 12V-36V.
Connection:Usually connect to the vehicle unlock ignition to the
first file,the file is ON shift,the machine will auto startup when
connect to the high level of above 12V.
D
、
The Green Wire(recorded in the wire of control)
Function: It can automatically startup and video when high level,
have the startup and video features, the operating
voltage 12V - 36 V.
Connection: To be a long time can be recorded from the car unlock
ignition to the first file, the file is ON shift.
E The Brown Wire-reversing wire(camar a signal switching)
Function:It can automat ically switching the front view and
the back view of camar a sngnal when high level.The operating voltage
、
12V - 36 V.
Connection:Usually connect with the video control wire on the Men ci.
When door opened will recording the coin box and door closed
recording in-vehicle
(1) Power signal bus(6-core: red black purple green brown white)
、
、
、
、
、
F
The White Wire(12V control wire)
Funtion:Use to control 12V power box ON or OFF,make the 12V power box
output with the recorder syncronously.
、
