manualshive.com logo in svg

Mirapoint 7700 Series, Руководство по оборудованию

Поделиться
Скачать
Mirapoint 7700 Series Скачать руководство пользователя страница 40

Installing Appliance Components

40

2

4.

Reinstall the storage controller card (

Installing the Integrated Storage 

Controller Card 

on page 41).

5.

Reconnect all cables.

6.

Close the appliance (

Closing the Appliance 

on page 24).

7.

Reconnect the appliance and peripherals to the power sources.

Integrated Storage Controller Card

Your appliance includes a dedicated expansion-card slot on riser 1 for an integrated 
storage controller card that provides the storage subsystem for your appliance’s 
internal hard drives. The controller supports SAS and SATA hard drives and also 
enables you to set up the hard drives in RAID configurations as supported by the 
version of the storage controller included with your appliance.

Removing the Integrated Storage Controller Card

c

Many repairs may only be done by a certified service technician. You should only 
perform troubleshooting and simple repairs as authorized in your product 
documentation, or as directed by the online or telephone service and support team. 
Damage due to servicing that is not authorized by Mirapoint is not covered by your 
warranty. Read and follow the safety instructions that came with the product.

To remove the integrated storage controller card:

1.

Power off the appliance, including any attached peripherals, and disconnect the 
appliance from the electrical outlet.

2.

Open the appliance (

Opening the Appliance 

on page 24).

3.

If installed, remove the expansion card (

Removing an Expansion Card 

on 

page 36).

4.

Disconnect the SAS cables connected to the card.

5.

Disconnect the cable connecting the card to the expansion-card riser.

6.

For a battery-cached RAID controller, disconnect the cable connecting the card 
to the RAID battery.

7.

Bend both the card-edge guides outward and pull the storage controller card 
out of the connector.

Содержание 7700 Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды