Guide to Installation and Operation
7
a progressive input signal.
PsF
→
P:
use this selection to output a progressive signal from
an interlaced input signal.
Mode C:
reserved for future use
Varicam 1:1:
use this setting to output a 24p, 25p or 30p signal
from a 60p or 59.94p signal originating from a
Panasonic varicam system.
Varicam 1:2 :
use this setting to output a 50p signal from a 60p
signal originating from a Panasonic varicam system.
4.2 Status LED
The multicolored status LED, located between the HD/SD SDI IN
and LOOP BNC connectors, is provided to identify any input
errors and the selection of the test pattern. The following lists all
possible situations.
Green
:
Indicates that the SDM-872p is powered and
has detected a valid input signal.
Red
:
Indicates an invalid input signal or simply, there
is no input signal installed.
Orange
:
The test pattern is selected.