SDM-872p
6
Markers 4:3 Selection:
On:
Set the “Markers 4:3” slide switch to this position to
display 4:3 markers on the 16:9 image.
Off:
The 4:3 markers are disabled.
Input format
I:
Set the “Input Format” slide switch to this position
for most input signal.
PsF:
Set the “Input Format” slide switch to this position
to access additional output format when input format
is 1920x1080 25PsF.
Pushbutton Selection
The “Select” pushbutton allows the selection of different process-
ing modes, according to the input format. When the pushbutton
is depressed once, the LED indicating the currently selected pro-
cessing mode flashes red and green; when depressed again, the
alternate option LED flashes in its turn if it is available. Confirm
the selection by depressing the pushbutton again. Other pro-
cessing modes are accessed by depressing the pushbutton con-
secutively until the desired mode is reached. For processing
mode
A
,
B
and
C
, both LEDs need to be turned on. See the sup-
ported format table in section
5 Specification
for details on
resulting outputs.
Mode A:
use this mode to output 25PsF signal from a 24p or
24PsF input signal.
Direct output:
use this selection to output a signal with the same
format as the input signal.
3:2 Insert:
inserts a 3:2 sequence to output a 59.94i and 60i signal.
Mode B:
reserved for future use
P
→
PsF:
use this selection to output an interlaced signal from