Miranda RCP-100 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 25

Miranda RCP-100 Скачать руководство пользователя страница 24

GUIDE TO INSTALLATION AND OPERATION

20

| RCP-100

RCP100.xxx> makeupdatedisk
RAM disk initialized - size is 5000 blocks...
Volume name is 3.0.0
Current directory set to 3.0/
RCP100.xxx>

Do not close the Telnet application.

Note: If the command

makeupdatedisk

is not recognized by RCP-100, type the following command,

which gives the same result:

makeramdisk 5000

5.

Start the WS_FTP application

6.

Connect to RCP-100 using the following parameters:

•

Host Name/Address:

(RCP-100 IP address)

•

Host type:

Automatic detect

•

User

ID:

Anonymous

•

Password:

guest

WARNING

: Select the “

BINARY

” file transfer mode for steps 7 and 13!

Using another transfer mode could lead to an incorrect data transfer, and the RCP-100 will
no longer be able to work, or to be reprogrammed via Telnet. It will require factory
reprogramming.

7.

In WS-FTP, copy the file rcp_update.bin located in the same directory , (left window of WS_FTP) to
RCP-100 (right window of WS_FTP). Use the Binary file transfer mode - see WARNING!

8.

Disconnect WS_FTP from RCP-100 (click " Close " button)

9.

Return to the Telnet application window and type:

updatercp

. On the telnet application window the

written flash sectors will be displayed gradually.

10.

After the file is copied in the RCP-100 flash memory, type

restart

. RCR-100 will restart with the new

firmware.

In the following steps the * typ files will be loaded into the RCP-100 flash memory.

11.

Restart the Telnet application telnet connect to RCP-100 with the IP address of RCP-100. Type

makeramdisk

. The following message will be displayed:

RCP100.xxx> makeramdisk
RAM disk initialized - size is 2048 blocks...
Volume name is 3.0.0
Current directory set to 3.0/
RCP100.xxx>

12.

In the Telnet window, type

cp -r 45.0 3.0

13.

In WS-FTP, copy all the files * typ of the new version, located in the same directory, (left window of
WS_FTP) to RCP-100 (right window of WS_FTP). Use the Binary file transfer mode - see WARNING!

14.

Disconnect WS_FTP from RCP-100 (click the " Close " button)

15.

In the Telnet application window, type

copytoflash

. The following message will be displayed:

«
...
22
23
24
25
»

Содержание RCP-100


























Отзывы:

Нет отзывов