GUIDE TO INSTALLATION AND OPERATION
ii
| Kaleido-Solo
Safety Compliance
The power supply of this equipment complies with the following standards:
UL 60950-1, 1st Edition, Safety for information technology equipment.
CSA C22.2 No. 60950-1-03, 1st Edition, Safety for information technology equipment.
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with FCC Part 15, Subpart B requirements for
Class A digital devices.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This equipment has been tested and found to comply with the requirements of the EMC directive
2004/108/CE:
EN 55022
Class A radiated and conducted emissions
EN 61000-4-2
Electrostatic discharge immunity
EN 61000-4-3
Radiated electromagnetic field immunity
– RF
EN 61000-4-8
Power frequency magnetic field immunity
EN 61000-4-11
Voltage dips, short-interruption and voltage variation immunity
ENV 50204
Radiated EMF Immunity
– RF 900 MHz pulsed
How to contact us:
For technical assistance, please contact the Miranda Technical support centre nearest you:
Americas
Telephone:
+1-800-224-7882
e-mail:
Asia
Telephone:
+852-2539-6987
e-mail:
Europe, Middle East, Africa, UK
Telephone:
+44 1189 523444
e-mail:
China
Telephone:
+86-10-5873-1814
e-mail:
France (only)
Telephone:
+33 (0) 1 55 86 87 88
e-mail:
Visit our web site at
www.miranda.com
