19
7. Press SELECT to store the new horizontal timing for the current format.
HOR
is displayed.
8. Press ESC to return to
TIMG
.
9. To return to normal mode, press ESC
3.5.4 Horizontal Fine Timing Delay
The horizontal fine timing allows an accurate adjustment of the horizontal timing
delay, ranging from –40 to +40, default being set to 0. Follow these steps in order
to adjust horizontal fine timing:
1. Press SELECT to enter the menu.
PROC
is displayed.
2. Press the “+“ push-button until
TIMG
is displayed.
3. Press SELECT to enable the timing menu.
FRAM
is displayed.
4. Press the “+” or “–“ push-button to display
FINE
.
5. Press SELECT to enable the horizontal fine timing menu. The current fine
timing delay in µs is displayed.
6. Use the “+” or “–“ push-button to set the required horizontal fine timing delay.
Press the “+“ and “–“ push-buttons simultaneously to set the timing to 0.
7. Press SELECT to store the new horizontal fine timing delay for the current
format.
FINE
is displayed.
8. Press ESC to return to
TIMG
.
9. To return to normal mode, press ESC.
3.6 Audio Functions
The DVP-101i can de-embed up to 2 audio groups from the ancillary data space
of the video input, pass it to companion DAP-711i/712i Audio Processor modules
and re-embed it at the output (see section 2.1
DVP-101i Mechanical Installation
for details about DAP module installation). Each audio group travels to the audio
processor using its own bus, called ABUS (audio bus); different parameters allow
the audio functions to be configured for each of the 2 buses.
3.6.1 Audio De-Embedding
Up to 2 audio groups may be de-embedded (“demuxed”) from the input video
signal; each of the ABUS may be assigned one of the audio groups. To select
which audio group to de-embed, follow these steps:
1. Press SELECT to enter the menu.
PROC
is displayed.
2. Press the “ + “ push-button until
ABUS
is displayed.
3. Press
SELECT;
#1
is displayed. Press SELECT to choose ABUS #1 or press
“+” to display
#2
and press SELECT.
4. Press
SELECT;
DMUX
is displayed. Press SELECT to enable the audio de-
embedding menu.
OFF
or the currently selected audio group is displayed.
5. Use the “+” or “–“ push-button to choose the desired audio group to de-
embed. Press the “+“ and “–“ push-buttons simultaneously to set audio de-
embedding to OFF.
6. Press SELECT to store the new audio de-embedding setting.
DMUX
is
displayed.
7. Press ESC to return to
ABUS
.
8. To return to normal mode, press ESC.
Содержание DVP-101i
Страница 36: ...31 5 Schematic DIagrams ...
