Miranda Densite IRD-3111 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 60

Miranda Densite IRD-3111 Скачать руководство пользователя страница 36

GUIDE TO INSTALLATION AND OPERATION

3.4.15 The Factory/Presets panel

This panel provides resources for saving, restoring and
transferring the configuration settings of this IRD-3111.

Load Factory

The IRD-3111 maintains a “Factory Default” alignment in its
memory, to which it can be restored at any time.

•

Click the

Load Factory

button to restore the card to its

Factory default alignment.

User Presets

The User Preset controls allow the user to save and recover
all configuration settings on the card.

Select any one of the five presets using the pulldown list.
The name of the currently-selected User Preset is shown on
the on the pulldown icon (e.g.

User1

,

User2

,…

User5

)

•

Click

Load

to load the contents of the selected User

Preset into the IRD-3111. All parameter settings and
values will be replaced by the contents of the selected
User Preset.

•

Click

Save

to store the current parameter settings and

values from the IRD-3111 into the selected User
Preset. The existing contents of the preset will be overwritten.

Profiles

This section provides resources to save and recover the entire card configuration (including user presets if desired) on
an external disk, or to copy it to another IRD-3111 card.

Click on

Profiles

to open the Profile Copy window.

Figure 3.28 Factory / Presets Panel

Figure 3.29 Profile Copy window

32

| IRD-3111

«
...
34
35
36
37
38
...
»

Содержание Densite IRD-3111





























































Отзывы:

Нет отзывов