manualshive.com logo in svg

Miranda Densite ENC-1103, Руководство по установке и эксплуатации

Поделиться
Скачать
Miranda Densite ENC-1103 Скачать руководство пользователя страница 10

ENC-1103 SDI to Composite/CAV/RGB Encoder 
Guide to Installation and Operation

 

 

Page 10 of 19 

ENC-1103 

Factory tab 

 
The Factory tab contains only the LOAD FACTORY button.  
Clicking this button will reinstate all default parameter values.   
 
See the ENC-1103 Menu below (page 16) to see the default value 
for all parameters. 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Alarm Config button 

 

This panel allows the alarm reporting of the 

ENC-1103

 

to be configured. The panel opens in a new window 
when the button is clicked, and can be resized if 
needed. 
 
The panel is organized in columns. 
 

Status/Name 

This contains an expandable tree listing all the alarms 
reported by this 

ENC-1103

 card. 

•

 

Each alarm name includes an icon that shows 
its current status 

•

 

Some alarms may be text-only and the alarm 
status is shown in the name and not by a status 
icon, e.g. 

 

 
The 

Overall alarm

 and 

GSM contribution

 columns 

contain pulldown lists that allow the level of 
contribution of each individual alarm to the alarm 
named in the column heading to be set.  

•

 

If there is no arrowhead in the box, there is no pulldown and the alarm is not user-configurable 

 
 

Overall Alarm 

This column allows configuration of the contribution of each individual alarm to the Overall Alarm associated with 
this card. The Overall Alarm is shown in the upper left corner of the iControl panel, and also appears at the bottom 
of the Status/Name column. 

Содержание Densite ENC-1103




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды