Miranda DENSITE DSK-3901 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 129

background image

GUIDE TO INSTALLATION AND OPERATION

LGK-3901/DSK-3901 |

53

6.3 Local Control using the Densité Frame Control Panel

6.3.1 Overview

Push the SELECT button on the LGK-3901/DSK-3901 card edge
(see section 4) to assign the local control panel to operate the
LGK-3901/DSK-3901. Use the control panel buttons to navigate
through the menu, as described below.

All of the cards installed in a Densité frame are connected to the
frame’s controller card, which handles all interaction between the
cards and the outside world. There are no operating controls
located on the cards themselves. The controller supports remote
operation via its Ethernet ports, and local operation using its
integrated control panel.

The local control panel is fastened to the controller card by a
hinged connector, and when installed is located in the front
center of the frame, positioned in front of the power supplies. The panel consists of a display unit capable of
displaying two lines of text, each 16 characters in length, and five pushbuttons.

The panel is assigned to operate any card in the frame by pushing the SELECT button on the front edge of that card.

•

Pushing the CONTROLLER button on the control panel selects the Controller card itself.

•

The STATUS LED on the selected card flashes yellow.

The local control panel displays a menu that can be navigated using the four pushbuttons located beneath the display.
The functionality of the push buttons is as follows:

[+] [–]

Used for menu navigation and value modification

[SELECT] Gives access to the next menu level. When a parameter value is shown, pushing this button once

enables modification of the value using the [+] and [–] buttons; a second push confirms the new value

[ESC]

Cancels the effect of parameter value changes that have not been confirmed; pushing [ESC] causes the
parameter to revert to its former value.

Pushing [ESC] moves the user back up to the previous menu level. At the main menu, [ESC] does

not

exit the menu system. To exit, re-push the [SELECT] button for the card being controlled.

If no controls are operated for 30 seconds, the controller reverts to its normal standby status, and the selected card’s
STATUS LED reverts to its normal operating mode.

6.3.2 Menu for local control

The LGK-3901/DSK-3901 has operating parameters that may be adjusted locally at the controller card interface.

•

Press the SELECT button on the LGK-3901/DSK-3901 front card edge to assign the Densité frame’s local
control panel to the LGK-3901/DSK-3901

•

Use the keys on the local control panel to step through the displayed menu to configure and adjust the LGK-
3901/DSK-3901.

Note:

The complete menu structure is shown in Annex 1 to this document, beginning on page 96.

SELECT

ESC

+

-

CONTROLLER

Figure 6.1

Densité Frame local control panel

USO

RESTRITO

«
...
57
58
59
60
61
...
»

Содержание DENSITE DSK-3901


































































































































Отзывы:

Нет отзывов

Похожие инструкции для DENSITE DSK-3901

Бренд: Omnia Страницы: 102

Бренд: Amplifier Tech Страницы: 36

Бренд: MICROENER Страницы: 24

Бренд: ASROCK Страницы: 173

Бренд: Rosewill Страницы: 2

Бренд: Cypress Semiconductor Страницы: 31

Airborne M2M ABDN-er-DP55 Series

Бренд: B+B SmartWorx Страницы: 120

Бренд: DigiTech Страницы: 28

Бренд: VANTAS Страницы: 30

Бренд: R3 Страницы: 48

VXC-114U Series

Бренд: ICP DAS USA Страницы: 8

Бренд: protech Страницы: 84

Бренд: MA Страницы: 4

Бренд: NAUTICAST Страницы: 20

Бренд: Panasonic Страницы: 78

StorageGRID Webscale SG5700 Series

Бренд: NetApp Страницы: 15

Бренд: ARX Страницы: 4

Бренд: Cambium Networks Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды