13
1.
Locate the CORING jumper (LK2) situated on the left side of the ASD-111i (refer
to figure 3.2 for location).
2.
To enable the coring function set the jumper in the
ON
position. In order to
remove the coring effect, set the jumper in the
OFF
position.
4 Specifications
Input
Signal:
G/Y, B/B-Y, R/R-Y: 0.7 Vp-p nominal or 1.0 Vp-p nominal
with sync
Return loss:
> 35 dB up to 5.75 MHz
Ext. ref:
SMPTE 170M/PAL ITU 624-4 or 2 Vp-p/4 Vp-p
composite sync with passive loop-through
Return loss:
> 35 dB up to 5.75 MHz
Output
Signal (3):
4:2:2 SMPTE 259M-C (270 Mbps)
Return loss:
> 15 dB up to 270 MHz
Jitter (wideband)
< 0.2 UI
Processing Performance
Quantization:
10 bits
Sampling:
27 MHz (2X oversampling)
Frequency response:
±0.1 dB to 5.5 MHz and +0/-0.15 dB from 5.5 to 5.75 MHz
Noise (unweighted):
< -61 dB to 5.75 MHz
Processing delay:
2.7 µs
Horizontal
centering:
-8 6 pixels by steps of 1 ns
Processing delay:
3.3 µs
Test signal:
100% color bars
Power:
14 W
Operating temperature range: 0 ºC to 40 ºC
Содержание ASD-111i
Страница 2: ...i ...
Страница 6: ...v ...
Страница 20: ...14 ...
Страница 21: ...15 5 Schematic DIagrams ...
