manualshive.com logo in svg

Miranda ADX-1842, Руководство по установке и эксплуатации

Поделиться
Скачать
Miranda ADX-1842 Скачать руководство пользователя страница 9

ADX-1852 HD/SD 4 AES Disembedder w. Analog Audio Monitor 

ADX-1842 HD/SD 4 AES Disembedder  

Guide to Installation and Operation

 

 

 

ADX-1842/1852 

Page 9 of 10 

 

Metadata 

 
The 

Metadata

 tab offers setting options for the output LTC 

signal for the embedded time code, RS-422 signal, GP1 
and GP2. 
 

 

 
The 

LTC Output

 window allows the user to select the 

source of the time code appearing at the LTC output (ATC, 
DVITC). For an HD-SDI input, using the 

HD ATC Select 

drop down menu, select the ATC signal to be disembedded 
(first ATC or second ATC). 
 
For an SD-SDI input, using the 

SD DVITC line

 drop down 

menu, select the desired line to be disembedded. If the 
input DVITC is in a 525 format, the available selections will 
be auto or lines number 10 to 20. If the input DVITC is in 
625 format, the Auto option remains, but the line numbers 
vary from 7 to 22. 
 
The delay drop down menu allows the user to add delay to 
the extracted time code while translated to LTC. The delay 
is selectable from none to 3 frames. 
 

 

 
The 

Status 

tab shows the detection of input embedded 

time code, RS-422, GPI 1 and GPI 2 signals. When 
present, the status icons turn to green. 
 

Monitoring Output 

 
The 

Monitoring Output

 tab is only available on the ADX-

1852. It allows the conversion of AES digital audio to 
stereo analog audio signals. 

 

 
Using the 

Audio Select

 drop down menu, select the AES 

output source for the stereo analog audio conversion. 
 
The 

OdBFS Level

 drop down menu allows the user to 

adjust the output level in 1 dB steps for an output level 
range of +12 dBU to +24 dBU at full scale amplitude. 
 
The 

VBit

 drop down menu allows the user to block 

monitoring of invalid AES outputs according to the validity 
(V) Bit status. The V-Bit can have two values: 

ƒ

 

‘0’, AES output is valid and can be converted into an 
analog audio signal.‘1’, AES output is invalid and 
cannot be converted into an analog audio signal. 

By selecting 

mute

 in the 

VBit

 drop down menu, the AES 

outputs flagged as invalid by the V-Bit will not be 
converted, while the data flagged as valid will pass through 
and be converted. By selecting 

pass

, the user ignores the 

V-Bit status and forces the conversion. 
 

Test 

 
The 

Test

 menu allows the user to enable test signals on 

the AES and LTC outputs for troubleshooting purposes. 
 

 

 

Factory 

 
Clicking the 

Load Factory

 button will restore all of the 

adjustable parameters to a factory-preset state. Those 
preset settings are indicated by an underline in the 

ADX-

1842 and ADX-1852 menus

 on pages 4 and 5 of this 

manual. 

Enables a test tone (1 KHz, R-steady, 
L-pulsed, at-18 dBFS) in each of the 
four AES outputs individually 
 
 
 
 
 
 
 
 
Enables an output LTC test loop (10 
second loop starting at 23:59:00:00)  

Содержание ADX-1842











Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды