Mirage BOX2IP, Руководство пользователя

Страница: 35 / 44

Extended Settings and Functions
35
9.6 Automatic Standby Function

Based on current EC regulations,
this receiver is equipped with an
energy saving system. After three
hours, the receiver will automatically
switch to energy save mode (energy
consumption of less than 0.5 W)
unless a function is triggered via
remote control during such period
(e.g. volume change or switching of
channels). You can deactivate the
automatic standby function via the
menu.
1. Select in the menu System Setup the
submenu Other and press OK .
2. Select Auto Standby to switch on or
switch off the automatic standby function,
using the keys
and (factory
setting is
Auto Standby On
).
9.7 Display Setting
Select in the menu
Tools
the submenu
Display
setting
and press
OK
to edit various display
settings:

Select Brightness to change the bright-
ness value from 0 to 100 (default value is
50) by using the keys
and .

Select Contrast to change the contrast
value from 0 to 100 (default value is 50) by
using the keys
and .

Select Saturation to change the saturation
value from 0 to 100 (default value is 50) by
using the keys
and .

Select Hue to change the hue value from 0
to 100 (default value is 50) by using the
keys
and .

Select Sharpness to change the sharp-
ness value from 0 to 10 (default value is 5)
by using the keys
and .
9.8 Format of the Video Signal at the
SCART Output
1. In the window
TV system
move highlight
on
Scart Out
item and press
OK
.
2. Press the keys PR+/PR- to select from the
list the format of the video signal at the
SCART output and press
OK . Possible val-
ues are
YUV
and
RGB
. Default is
YUV
.

Due to the internal signal processing
it’s not anymore possible to select
higher resolutions than 576i even at
the HDMI if RGB is selected
9.9 Digital Audio Out

Select in the menu System Setup the
submenu TV System and press OK .

Select
Digital Audio Out
to set the format
of the digital audio signal by using the keys
and :
PCM
– Pulse Code Modulation (default),
DD
– Dolby Digital (multi-channel audio).

For programs broadcasted in DD
format, select DD if you have a con-
nected DD-compatible multi-
channel amplifier or a DD-
compatible home cinema system, or
if your TV set is capable of pro-
cessing DD signals.
9.10 Simultaneous Playback of Picture
and Sound
Asynchrony between the image and the sound
signals might for example occur in your home
cinema system due to the use of long cables.
Your receiver offers the possibility to balance
this by slightly shifting the audio against the
video signal.
1. Select in the menu
System Setup the
submenu
Other
and press
OK
.
2. Select AV Sync Value and set a value of
shift between
-500ms
and
+500ms
using
the keys und (factory default
is AV Sync Value
0 ms
).