User Manual
Miraclebox Premium Twin HD
7. Upgrade your Miraclebox
Sometimes you need to upgrade the software in your Miraclebox Premium. Normally you can
make software updates by going to
Main Menu
>
Setup
>
Software Management
>
Software
Update
(See 5.7 for more information).
If you want to flash the Miraclebox with a new software please follow the below steps.
1. Start by downloading the latest software from
party software you want to use.
2. Extract the downloaded file so that you have a directory named
miraclebox
.
3. Copy this folder and its content to a FAT32 formatted USB memory.
4. Power off the Miraclebox Premium with the Power switch on the rear. Insert the USB
memory in the USB connection on the Front Panel.
5. Power on the receiver using the Power switch.
6. When you see the text “Press OK to Upgrade!” on the front display press OK on the
touch panel to start upgrading.
7. The text “Upgrading” will appear which means that the receiver is flashing. (It will take
about 5 minutes).
8. Your Miraclebox will automatically reboot after it has finished flashing. It will then boot
up the new software and start the First Time Installation Wizard.
You have now successfully upgraded/flashed your Miraclebox Premium!
Miraclebox Multimedia AB
50
EN
NOTE:
If you faulty upgrade the software or software that are not intended for Miraclebox
Premium, Miraclebox Multimedia will take no responsibility and the warranty will be void.
Содержание premium
Страница 1: ...U s e r Ma n u a l Mi r a c l e b o x P r e mi u mT w i nH D...
Страница 58: ......
