Miraclebox premium, Руководство пользователя

Страница: 20 / 58

Miraclebox Premium Twin HD User Manual
19 Copyright © Miraclebox Multimedia AB
NOTE: If you have chosen to automatically scan your DiSEqC settings, Miraclebox
will first scan and then display the found DiSEqC ports. If correct proceed with OK.
In our example we have installed a satellite tuner (DVB-S2) as Tuner A. If you have
a DVB-S2 tuner as Tuner B also, please use same instructions. For information on
how to configure your DVB-C/T2 tuner please continue to the next page.
•
Configuration mode
Simple : This is the most common choice. Used for DiSEqC, Positioner etc.
Loopthrough to : Choose if you wish to get the signal from the second tuner.
Equal to : Choose if the selected tuner has the same configuration as the second.
Advanced : Used for advanced users.
Not configured : Choose if there is nothing connected the tuner.
•
Mode
Single : Choose if there is only one satellite connected.
DiSEqC A/B : Choose if you have two satellites connected via a DiSEqC switch.
DiSEqC A/B/C/D : Choose if you have up to four satellites connected.
Toneburst A/B : Used for Toneburst switches.
Positioner : If you have a Positioner/motor this is the choice.
•
Port A-D
Choose which satellite that is
connected on each port. Miraclebox
Premium offers you a unique
Automatic
function that will find your DiSEqC
settings automatically.
(Works only for Thor 0.8°W, Sirius
4.8°E, Hotbird 13°E and Astra 19.2°E.)
•
Set voltage and 22KHz
(Only if DiSEqC is chosen in Mode ) Should be YES as default.
•
Send DiSEqC
Should be NO as default.
Press OK when you are ready to proceed to configure the second tuner installed.