Miracle-Gro Twelve, Инструкция по эксплуатации

Страница: 8 / 20

8
Choose Your Location, Fill with Water
• Your Miracle-Gro® Twelve™ Indoor Growing System
holds two gallons of water and when it’s full it can be
pretty heavy, so make sure you have it in its preferred
location before adding water to the reservoir.
Remember to keep your unit unplugged until you’ve
filled it with water and finished the setup instructions.
• When you’re ready, fill the reservoir with two gallons
of water (Look for the fill line on the inside wall.).
Return Parts to Top of Reservoir
• Place all loose components back into original places
in the reservoir with the exception of the planting site
covers [M]. Then, install the safety screws [K] at the
outside ends of the middle cover plate [G].
F I L L L I N E
E
Set Up Your Plants
TIP:
Be sure the nozzle lines up with the cutouts on the bottom of
the middle cover plate [G] so the plate fits flush with the frame.
G
N OZ Z L E
When moving your unit, lift it by the steel legs, not the shade.
Be sure you look for a place with an outlet nearby.
TIP:
L
K
F
G