MIRACALL TECHNOLOGY CO.,LTD.
14
How to exit from system program status
Firstly, return to system program status, then press “CLEAR” key, or hook
on after hook off.
iii. SYSTEM PROGRAM
Program 01: CO Line Setting #1
The upper row display:
LINE SETTING 1
The lower row display:
L-ABCDE
L: 1-4 (CO line number, or * for all CO lines)
A: 0-2 (CO line connection: 0-disable connection,1-enable but without
CLID, 2-enable connection but with CLID)
B: 0-3 (Caller ID delay time: 0- 3.5s, 1- 6.5s , 2-11.5s, 3- set by users.)
C: 0-1 (1-Auto Attendant mode, 0- Operator mode.)
D: 0-3( Auto Attendant: 0-disable 1-available Day mode only, 2-available
Night mode only, 3- available Day/Night mode)
E:0-1(Long-distance call restriction: 0-restricted , 1-no restriction )
Single Line Phone:
Input program item code”01”, the program status entered when hear
a long reminding tone. Firstly, input CO.LINE number 1-4 , then press” * ”
for cursor shift to CO Line setting and input relative parameter.
After finish that, press” * ”,transfer to next CO Line setting, and repeat
the above procedure. Press “#” to save and return to system program
status.
◆
Eg
:
set CO Line 3 to be Auto Attendant in day mode.
Key phone
: press “FNC” key three times ,then input 1967590-
