10
Installation
General
The installation must be carried out in accordance with these instructions, and must
be conducted by designated, qualified and competent personnel.
The installation must comply with any particular regulations and practices, specified
by the local water supply regulations.
The product may be installed in a loft space, under the bath or in a convenient
cupboard space providing there is enough room for maintenance (e.g. Removal
of Digital Mixer Lid), failure to do so may result in being unable to carry out
routine maintenance and servicing. Safe and easy access to the installed
product MUST be available at all times.
When installing a mixer valve in an area not regularly accessed, consideration
for potential leaks must be taken into account. While such events are unlikely,
it is advisable to periodically check the installation for traces of water on or
around the product. If possible, site the valve in a location where any leak
would be contained or routed to avoid areas sensitive to water damage.
Inlet and outlet isolating valves
MUST
be installed close to the Digital Mixer for ease
of maintenance.
►
Caution!
The Digital Mixer and the Power Supply Unit must be installed in a
dry area where it will not freeze.
