Mio 53P, Полное руководство пользователя

Страница: 6 / 14

Mio ALPHA User Guide 06
Troubleshooting
•
You may need to tighten Mio ALPHA’s strap and/or move the watch further up your forearm.
•
On cold days ALPHA’s technology can be impacted. We recommend activating the
heart rate reading while still indoors and, if necessary, wearing a sleeve over ALPHA.
•
If you are still having trouble, try wearing ALPHA on your other wrist.
•
Minimize hand movement and extreme bending of the wrist while using ALPHA’s
continuous heart rate.
If ALPHA cannot detect your heart rate during the FIND period (2 min), it will leave EXERCISE
mode and go back to TIME mode. Please refer to the steps above and try again.
SETTING YOUR TARGET HEART RATE
To specify your target heart rate zone, your Mio ALPHA must be in EXERCISE mode.
Your target heart rate (HR) zone consists of your upper heart rate limit and your lower heart
rate limit. These limits are usually a percentage of your maximum heart rate (MHR). This table
shows some examples:
EXERCISE TYPE LOWER HR LIMIT UPPER HR LIMIT
Warm Up 50% of MHR 60% of MHR
Moderate 60% of MHR 70% of MHR
Fitness 70% of MHR 80% of MHR
Training 80% of MHR 90% of MHR
If you don’t know your maximum heart rate or upper and lower heart rate limits, use your
preferred method for calculating them or check with your doctor.
When you start using your ALPHA while you exercise, you’ll soon get an idea of your personal
heart rate zone for different levels of activities.
Tip:
When you set your target heart rate zone, you will be prompted to set the upper heart
rate first, then the lower heart rate.
To Set Your Target Heart Rate Zone
1. With Mio ALPHA in EXERCISE mode, press and hold the
SET
button until the watch
beeps and the display says SET UP .
2. Press the
+
button to select the first digit of the heart rate for your desired upper
heart rate limit. The first digit will be a number from 0 to 2.
3. Press the
SET
button to confirm your choice.
4. Repeat steps 2 and 3 for the next two digits of the heart rate, selecting a number
between 0 and 9 for each.
When you have set the upper heart rate limit, the display will say LOW . Repeat steps 2
through 4 to set the lower heart rate limit.