22
4. Telnet Main Menu screen (Fig. 32).
Fig. 32-Telnet: Main Menu
•
Set IP Address
This function is for setting the IP Address, the Gateway Address, and the Subnet Mask.
•
Set SNMP MIB System
This function is for setting the MIB System Group parameters.
•
Set SNMP Access Control
This function is for setting the IP Manager, the Community String, and the Access Permission.
Note: The configuration of ‘Set SNMP Access Control’ is only used for SNMP Network Manager.
•
Set SNMP Trap Notification
If you want to use a PC and perform the ‘Trap’ function of the SNMP manager to manage the RPM through
SNMP-32 card, the IP address of the PC must be added in this list of SNMP-32 card.
Note: The configuration of ‘Set SNMP Trap Receiver’ is only used for SNMP Network Manager.
•
Set System Time & Time Server
This function is for setting the System Date, and the System Time.
•
Set Web and Telnet User Account
This function is for setting the user’s account authorization.
•
Set Email
This function is for setting the email accounts to receive power event notification.
•
Reset Configuration to Default
This function is for setting all values to their default settings.
•
Save & Reboot
This function is for saving the current configuration (including any/all changes that were made) and then
rebooting the SNMP-32 card.
•
Exit Without Saving
This function is for exiting the configuration setup without saving any/all changes that were made.
