Minuteman RPM1581HVN Скачать руководство пользователя страница 26

24 

9. Limited Product Warranty 

 

Para Systems, Inc. (Para Systems) warrants this equipment, when properly applied and 
operated within specified conditions, against faulty materials or workmanship for a period of 
three (3) years from the date of purchase.  For equipment sites within the United States and 
Canada, this warranty covers depot repair or replacement of defective equipment at the 
discretion of Para Systems.  Depot repair will be from the nearest authorized service center.  
The customer pays for shipping the product to Para Systems.  Para Systems pays ground 
freight to ship the product back to the customer.  Replacement parts and warranty labor will be 
borne by Para Systems.  For equipment located outside of the United States and Canada, Para 
Systems only covers faulty parts.  Para Systems products that are depot repaired or replaced 
pursuant to this warranty shall only be warranted for the unexpired portion of the warranty 
applying to the original product.  This warranty applies only to the original purchaser who must 
have properly registered the product within 10 days of purchase. 
 
The warranty shall be void if (a) the equipment is damaged by the customer, is improperly used, 
is subjected to an adverse operating environment, or is operated outside the limits of its 
electrical specifications; (b) the equipment is repaired or modified by anyone other than Para 
Systems or Para Systems approved personnel; or (c) has been used in a manner contrary to the 
product’s User's Manual or other written instructions. 
 
Any technical advice furnished before or after delivery in regard to use or application of Para 
Systems’ equipment is furnished without charge and on the basis that it represents Para 
Systems’ best judgment under the circumstances, but it is used at the recipient’s sole risk. 
 
EXCEPT AS PROVIDED HEREIN, PARA SYSTEMS MAKES NO WARRANTIES, 
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE.  Some states do not permit limitation of implied 
warranties; therefore, the aforesaid limitation(s) may not apply to the purchaser. 
 
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL PARA SYSTEMS BE LIABLE FOR 
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING 
OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.  Specifically, Para Systems is not liable for any costs, such as; labor for on-site 
installation, on-site maintenance or on-site service, lost profits or revenue, loss of equipment, 
loss of use of equipment, loss of software, loss of data, cost of substitutes, claims by third 
parties, or otherwise.  The sole and exclusive remedy for breach of any warranty, expressed or 
implied, concerning Para Systems’ products and the only obligation of Para Systems hereunder, 
shall be depot repair or replacement of defective equipment, components, or parts; or, at Para 
Systems’ option, refund of the purchase price or substitution with an equivalent replacement 
product.  This warranty gives you specific legal rights and you may also have other rights which 
vary from state to state. 
 
No employee, salesman, or agent of Para Systems is authorized to add to or vary the terms of 
this warranty. 

 
 
 

PN: 34000462 R2

Содержание RPM1581HVN



























Отзывы: