13
Control: Ping Action
This allows you to Ping the device that is connected to a specific outlet and if there is no response the outlet can be
rebooted.
Automatically cycle’s power to a locked device connected to the RPM by rebooting the outlet.
Ping IP Address:
Set the IP address of the device to be monitored by the RPM.
Response 10 minutes:
The RPM will ping the assigned IP address once each minute. If the device does
not respond, then the RPM will repeat the ping once every minute, if the device does not respond after 10
attempts (10 minutes), the RPM will carry out the assigned action automatically.
Action:
Select the outlet action “OFF” or “OFF/ON”
Active:
Enables this function.
