Minuteman Kleen Sweep 25W, Инструкция по эксплуатации

Страница: 33 / 40

33
Maintenance and Service
5.7.1 Cleaning the filter
Clean the filter (Fig. 10/1) in the dust
vacuum as necessary using the shak-
ing device (Fig. 10/4). In the case of ex-
treme accumulation of dirt, clean the
filter as follows:
1. Switch the machine off and remove
the sweeper's container.
2. Loosen the wing bolts (Fig. 10/5).
Pivot the filter support frame (Fig. 10/
3) down and remove it.
3. Remove the filter from the filter sup-
port frame.
4. Beat the filter clean or use a vacuum
cleaner. Be careful not to damage
the filter ribs!
5. Insert the correct side of filter in the
filter support frame. The sealing strip
(Fig. 10/2) must point towards the
suction turbine!
6. Hook the filter support frame in the
holder (Fig. 10/6) and fix in place
with the wing bolts.
7. Reinstall the sweeper's container.
5.7.2 Changing the filter
Check the filter (Fig. 10/1) every 250
operating hours for signs of wear and
change it as necessary.
1. Switch the machine off and remove
the sweeper's container.
2. Unscrew the wing bolts (Fig. 10/5).
Pivot the filter support frame (Fig. 10/
3) down and remove it.
3. Remove the filter from the filter sup-
port frame.
4. Insert the correct side of the new fil-
ter in the filter support frame. The
sealing strip (Fig. 10/2) must point
towards the suction turbine!
5. Hook the filter support frame in the
holder (Fig. 10/6), if necessary, and
fix in place with the wing bolts.
6. Reinstall the sweeper's container.