background image

Safety Information

1

Safety Information

1.1

General Safety Information

Apart from the instructions contained in 
this manual, the general safety instruc-
tions and accident prevention regulati-
ons, as imposed by law will have to be 
complied with. Do not put the Manual 
aside without reading it even if you used 
similar sweepers before. Take the time 
to read them now and save time later. It 
will be of essence to make yourself fa-
miliar with all accessories and controls, 
as well as their functions, before you 
start working. Take time to read now 
and save time later.
Machines with known defects must not 
be used.
Prior to operation make yourself familiar 
with all systems and controls and "whe-
re they arrive". Avoid the mess of ha-
ving to read this book while trying to run 
the machine.
Using the machine in areas with explo-
sion hazard, on public roads and places 
is prohibited.
The operator has to use the machine 

within its design limits.
Shut the motors down before transpor-
ting the machine.

Keep clear of hazard zo-
ne!

Before commencing work, the operator 
has to make sure that the Kleen Sweep 
40R/47R and its accessories are in pro-
per and safe condition. 
Warning and instruction labels attached 
to the machine contain important infor-
mation about safe operation. Illegible or 
lost labels have to be replaced.

Make sure that all covers 
are fitted before starting 
to sweep.

When sweeping in clo-
sed rooms, provide for 
sufficient ventilation.

5

Содержание HM40B














































































Отзывы: