Minuteman E24 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 44

background image

23

5 Maintenance and Care

General

Compliance with the recommended
maintenance work will ensure that you
always have a reliable machine available.
Daily or weekly maintenance and repair work
may be executed by the driver/ operator
having been trained accordingly. Further
Minuteman system maintenance work must
be performed by qualified personnel only.
Please contact your local Minuteman Service
Center or Minuteman contract dealer. We
cannot be held liable for damages resulting
from non-compliance with these instructions.
Please indicate the machine’s serial number
with any enquiry or spare part order, see
paragraph 1.7 - Nameplate.

Before proceeding to maintenance
and care work you are advised to
read and comply with the Safety
Information chapter!

5.1

Minuteman System Maintenance

The Minuteman System Maintenance:
• guarantees reliable operability of the Min-

uteman machines (preventive mainte-
nance)

• minimizes operating costs, repair costs

and maintenance costs

• ensures long service life and operability

of the machine

The Minuteman System Maintenance is
structured in separate modules and de-
termines specific technical works to be
executed as well as the intervals for such
maintenance works. For any specific
maintenance type, the replacement parts are
determined and listed in spare part kits.

System Maintenance K:

To be performed by the customer in ac-
cordance to the maintenance and care
instructions contained in the operating
instructions (daily or weekly). operator will
be instructed upon delivery of the machine.

System Maintenance I :

(every 125 hours of operation)
To be performed by qualified personnel of
authorized Minuteman Service Center in
accordance with the machine-specific
system maintenance including spare part kit.

System Maintenance II:

(every 250 hours of operation)
To be performed by qualified personnel of
authorized Minuteman Service Center in
accordance with the machine-specific
system maintenance including spare part kit.

System Maintenance S:

(every 500 hours of operation safety check)
To be performed by qualified personnel of
authorized Minuteman Service Center in
accordance with the machine-specific
system maintenance including spare part kit.

Maintenance and Care

«
...
21
22
23
24
25
...
»

Содержание E24













































Отзывы:

Нет отзывов

Похожие инструкции для E24

Powr-Flite BLACK MAX PFX1350 Series

Бренд: Tacony Страницы: 11

Бренд: Goobay Страницы: 20

2000 PSI Series

Бренд: Apeks Страницы: 56

Бренд: Kärcher Страницы: 331

Бренд: Abicor Binzel Страницы: 132

Бренд: Vax Страницы: 26

Бренд: YANGZI Страницы: 17

Бренд: Tennant Страницы: 96

Бренд: ECODORA Страницы: 12

Бренд: Basic Equipment Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды