26
Care - After Use
After Use
1. When fi nished scrubbing, push the blue button to turn off the brush motor, and lift the scrub deck.
2. Push the orange button to stop the squeegee, and raise it off of the fl oor. Once the button is pushed, the squeegee will
continue to run for an additional 8 seconds to pick up the remainder of the water off of the fl oor. Once the squeegee
has raised, the vacuum motor will run for another 8 seconds to clear out the vacuum lines.
3. Move the machine to a service area for daily maintenance and review items that may need service.
4. Empty the solution tank by disconnecting the solution tank drain hose from the clip on the side of the solution/recovery
tank and routing hose to a drain. Rinse the tank with clean water to prevent any buildup of dried chemicals that could
clog the plumbing inside the solution tank, and the drain hose cap.
5. Empty and clean the recovery tank by fl ushing with a hose. Be sure to also clean the fl oat shut off screen.
6. Remove the brushes or pad holders and rinse them in warm water and hang to dry.
7. Remove the squeegee, rinse with warm water and reinstall after cleaning.
8. Check the maintenance schedule in the next section and perform any required maintenance before storing the machine.
9. Store the machine indoors in a clean dry place. Keep from freezing. Leave solution/recovery tank lid open for ventila-
tion to prevent odor buildup.
10.Turn Key switch OFF (O) and remove key.
