18
Machine Operation
Loading and Unloading Brush
Brush Unloading
The brush deck must be fully raised to unload the brush, turn the ignition keyswitch to the left and hold it until the brush motor has come up
to speed (approximately 4 seconds). There will be an audible sound as this happens. Release the key, and the spring return will return the
key to the home position, and the brush should drop off . The brush can now be cleaned, or replaced.
Brush Loading
To load the brush, center the brush under the scrub deck. Press the blue brush button on the control panel. Once the scrub deck has
completely lowered into position, tap the accelerator pedal lightly. The brush will automatically load.
