Model: MHD-61S2S
3
S
PECIFICATION
:
HD-SDI in/out interface
Connectors :BNC 75Ω
Cable Impedance:75Ω
±
3Ω
Data Throughput:270Mbps – 1.485Gbps (SMPTE
292M)
Aux port
Connector :RJ45 (Cat 3) type
Pin definition:
RS-485 in (Pair 1 white/green)
RS-485 out (Pair 2 white/orange)
+24V (Pair 3 white blue)/ Gnd (Pair 4 white/brown)
Power Supply Input
(Head End input)
Power in via RJ45(Aux port)
9 ~24V DC, rated current 0.5 – 2A
Power Supply Output
(Camera Side output , without
PoC camera )
Power out via RJ45(Aux port)
V
IN
@ Head End -1V -Coax DC drop
(varies with cable
type/length)
DC Feed via Coax
V
IN
@ Head End -1V -Coax DC per hop
(varies with cable
type/length
)
Maximum 400 mA – 30 mA per repeater
Environmental
Operating Temperature0
0
C to 50
0
C
Relative humidity:Up to 85% non-condensing
Storage Temperature:-20
0
C to 70
0
C
Note:
Cameras (model name: MN1/MN2) can be powered if there are only 3
repeaters used in-line. If use more than 3 repeaters, it will not allow sufficient supply
for powering the camera. In this case, external power has to be supplied to the
camera.
P
ERFORMANCE
S
PECIFICATIONS
Performance by
coax type
Max coax length for
error free operation
@ 1.485 Gbps per
unit
Power over cable Budget
Max # Repeaters
(total length)
DC power after 2
repeaters with POC
camera
RG59 (23dB/100m)
Above 100 meters /
5 (500m)
6.5W
