Minox DTC 700, Инструкция по эксплуатации

Страница: 32 / 60

32
Video length
Go to the “Main Menu” by pressing the menu but­
ton (8) and select the menu option “Video Length”.
This is located under the first tab “Camera Set­
tings”. You can access the submenu by pressing the
OK button (9) or the right arrow key (10). Enter the
desired video length (5­30s.) using the Up/Down
arrow key (10) and press the OK button (9) to save
the settings. The camera will automatically return to
the menu option “Camera Settings”. You can return
to the previous menu optionwithout changing the
settings by pressing the left arrow key (10).
Video sound
This function allows you to decide whether to re­
cord the sound when shooting a video or not. Use
the Menu button (8) to select the Menu item „Vi­
deo sound“ from the Main Menu. This is under the
first tab „Camera settings“. Press the OK button (9)
or the right arrow key (10) to access the Sub­menu.
With the Up/Down arrow keys (10) you can now
select whether to record the sound or not. Select
„On“ for video shooting with sound or „Off“ for
video shooting without sound. Press the OK button
(9) to save the setting; this returns you to the „Ca­
mera settings“ menu item. Use the left arrow key
(10) to return to the higher menu without changing
the settings.
Shutter lag
This function allows you to specify the length of
the time between two pictures when your came­
ra does not respond to movement. The options for
programming the sequential shooting intervals
extend from 1 second to 60 minutes.Go to “Main
Menu” by pressing the menu button (8) and select
the menu option “Shutter Lag”. This can be found
under the tab “Camera Settings”. You can return to
the submenu by pressing the OK button (9) or the
right arrow key (10). In the submenu, choose the
desired time interval using the On/ Off arrow keys
(10). Press the OK button (9) to save the settingand
to return to the menu option “Camera Settings”.
By pressing the left arrow key (10), you can return
to the previous menu selection without changing
the settings.
Trigger mode
This function allows you to decide the trigger speed
for the DTC 700. When movement is detected, the
camera triggers in less than a second in battery
operation. For this it has to ‚wake up‘ from the
stand­by mode. If you are using the camera with
an external power source, you can set the DTC 700
so that stand­by mode is never selected. This means
that the camera does not need to ‚wake up‘ when
there is movement and triggers instantaneously.
Use the Menu button (8) to access the Main Menu
and select „Trigger mode“. This is under the first
„Camera settings“ tab. Press the OK button (9) or
the right arrow key (10) to access the Sub­menu.
In the Sub­menu you can set the required trigger
mode with the Up/Down arrow keys (10). Select
„Normal“ for battery operation (< 1 sec.) and „Po­
wer“ for operating with an external power source
(instantaneous). Press the OK button (9) to save
the setting and this will return you to the „Camera
settings“ menu item. Use the left arrow key (10)
to return to the higher menu without changing the
settings.
Illumination
Your DTC 700 cannot access external illumination;
please always select “Internal”. Should you nevert­
heless select “External”, the flash will remain deac­
tivated even in the dark and you will get only black
pictures at night.
PIR [Passive Infrared] Sensor: Setting the
responsivity of the IR sensor
Your MINOX DTC 700 allows you the possibility of
adjusting the responsivity of the IR sensor at three
levels – low, normal, and high. This function is ef­
fective, for instance, for reducing the possibility of
an inadvertent activation of the camera through
movements of non­relevant objects, such as the
branches and grass. In order to set the responsi­
vity of the IR sensor to your DRC 700, please go
to the “Main Menu” by pressing menu button (8)
Note: Please use the ‚Power‘ Trigger mode
only when the camera is connected by a mains
adaptor to the power supply system. In battery
operation this setting will exhaust the batteries
in a very short time.