Minox DTC 700, Инструкция по эксплуатации

Страница: 29 / 60

29
Language setting
Since the Trail Camera DTC 700 comes with default
factory settings with an English menu, follow these
steps to make the right language selection:
1. Bring the main switch (11) to the switch setting
“SETUP” mode.
2. You will directly be brought to “manual activa­
tion” option in the camera.
3. Now press the menu key (8). You will be direc­
ted to the main menu of the camera.
4. Now press the the arrow key to the right (10) to
change the tab in the “Main Menu”.
5. Then press the arrow key (10) facing downward.
6. Now it shows the highlighted menu option
“Language”.
7. Press the OK button (9).
8. Using the down arrow key (10) select “German”
(highlighted).
9. Press the OK button (9).
10. The camera will return to the “Main Menu”. The
language has been set to “German”.
Mounting the camera
1. Mounting strap: Two strap mounts (17) are
attached to the rear side of the camera core to
mount the camera. The mounting strap included
in the delivered package is passed through both
mounts. The camera is fastened with the latch on
the mounting strap.
2. Tripod: The external case of the camera has 1/4”
tripod mount (18) at the backto fasten the came­
ra to the tripod.
Setup and operating mode
You camera has two mode settings:
1. Setup mode
Switch your DTC 700 camera to the “SETUP” mode
(SETUP = setup mode, main switch (11) centre).
You will be directed to the “Manual Controls” of
the camera. Press the menu button (8) to get to
the main menu of the camera. You can alternate
between 2 tabs in the main menu by activating
the right and left arrow keys (10). The tab currently
selected is highlighted in green. Under the first tab
displaying the “Camera icon” you can adjust the
settings directly relevant to the functioning of the
camera. These tabs will hereinafter be referred to
as “camera settings”. The second tab showing the
“Hammer and Wrench icon” allows you to adjust
all the settings. This will hereinafter be referred
to as “General Settings”. This mode allows you
to program the camera and undertake all display
settings such as date, time, temperature, etc. that
are supposed to be displayed later on the pictures
or video clips. Use the Up/Down arrow keys (10)
to access the tabs for the individual menu options.
To change the tabs once a menu option has been
selected (highlighted), move the left arrow key (10)
once. The camera will return to the previous selec­
tion menu. Only that option is now lit green. Now
you can use the Right/ Left arrow key (10) to move
between the tabs “Camera Settings” and “General
Settings” in order to select the desired menu op­
tions with the Up/Down arrow keys (10).
2. Operation mode
Switch your DTC 700 camera to the “operation
mode” (ON = operation mode, main on/ off switch
(11) upper position). In this mode, your DTC 700
camera automatically accepts the new settings you
previously programmed in the “SETUP” mode.
Menu functions and settings
Manual Controls
This setting offers you the possibility of using your
DTC 700 like a normal digital camera. As in any
other normal digital camera, you can view the di­
gital stills and video clips on the display monitor
and accept them at the same time. Once your DTC
700 is in the “SETUP” mode (see the section on
Setup and Operation mode), it is immediately in
the “Manual Controls” mode. You can use the right
(photo) and left (video) arrow keys (10) to move
between the “photo” and “video” mode. You can
change the image resolution of the picture by repe­
Note: The blue activating LED (4) will blink for a
few seconds before the camera is ready for use.