Minox DTC 650, Инструкция по эксплуатации

Страница: 25 / 56

25
used in the DTC 650, it can be formatted
in DTC 650. Once it is inserted, the SD card
must be checked for proper functioning by
taking pictures.
Language setting
Since the Trail Camera DTC 650 comes with
default factory settings with an English menu,
follow these steps to make the right language
selection:
1. Bring the main switch (11) to the switch
setting “SETUP” mode.
2. You will directly be brought to “manual
activation” option in the camera.
3. Now press the menu key (14). You will
be directed to the main menu of the
camera.
4. Now press the the arrow key to the right
(10) to change the tab in the “Main
Menu”.
5. Then press the arrow key (10) facing
downward.
6. Now it shows the highlighted menu op-
tion “Language”.
7. Press the OK button (10).
8. Using the down arrow key (10) select
“German” (highlighted).
9. Press the OK button (10).
10. The camera will return to the “Main
Menu”. The language has been set
to “German”.
Mounting the camera
1. Mounting strap
Two strap mounts (16) are attached to the
rear side of the external camera case to mount
the camera. The mounting strap included in
the delivered package is passed through both
mounts. The camera is fastened with the latch
on the mounting strap.
2. Tripod
The external case of the camera has ¼” tripod
mount (17) at the backto fasten the camera
to the tripod.
Setup and operating mode
You camera has two mode settings:
1. Setup mode
Switch your DTC 650 camera to the “SETUP”
mode (SETUP = setup mode, main switch (11)
centre). You will be directed to the “Manu-
al Controls” of the camera. Press the menu
button (14) to get to the main menu of the
camera.
You can alternate between 2 tabs in the main
menu by activating the right and left arrow
keys (10). The tab currently selected is high-
lighted in green. Under the first tab displaying
the “Camera icon” you can adjust the settings
directly relevant to the functioning of the cam-
era. These tabs will hereinafter be referred to
as “camera settings”. The second tab showing
the “Hammer and Wrench icon” allows you to
adjust all the settings. This will hereinafter be
referred to as “General Settings”. This mode
allows you to program the camera and under-
take all display settings such as date, time,
temperature, etc. that are supposed to be
displayed later on the pictures or video clips.
Use the Up/Down arrow keys (10) to access
the tabs for the individual menu options. To
change the tabs once a menu option has been
selected (highlighted), move the left arrow
key (10) once. The camera will return to the
previous selection menu. Only that option is
now lit green. Now you can use the Right/
Left arrow key (10) to move between the tabs
“Camera Settings” and “General Settings” in
order to select the desired menu options with
the Up/Down arrow keys (10).
2. Operation mode
Switch your DTC 650 camera to the “opera-
tion mode” (ON = operation mode, main on/
off switch (11) right hand side). In this mode,
your DTC 650 camera automatically accepts
the new settings you previously programmed
in the “SETUP” mode.