14
E
Loading a SD memory card
(optional accessory)
T h e c a m e r a c o m e s w i t h 8 M B o f i n t e r n a l
memory, allowing you to store images and video
clips in the camera. However, you can expand
the memory capacity by using an optional SD
memory card so that you can store additional
images and video clips.
1. Make sure the camera is off.
2. Slide the battery/SD card cover in the direction of the OPEN arrow.
3. Insert the SD memory card.
The front side of the memory card (printed arrow) should face towards the front side of
the camera
.
If the card cannot be inserted, check the orientation
.
4. Close the battery/SD card cover.
To remove the SD memory card, make sure the camera is off. Open the
battery/SD card cover.
Press lightly on the edge of the memory card and it will
eject.
• To prevent valuable data from being accidentally
erased from an SD card you can slide the write
protect tab (on the side of the SD memory card) to
“LOCK”.
• To save, edit, or erase data on an SD memory card,
you must unlock the card.
NOTE
Attaching the strap
To prevent accidental dropping of the camera
, always
use the strap.
1. First thread the small loop of the wrist strap
through the strap eyelet on the camera and
then pull the large loop through the small loop
until the strap is firmly secured.
LOCK
LOCK
Write protection
tab
Write protection
state
