How To Adjust Resistance Level (MagRide60-D)
MagRide60-D provides 3 different resistance levels to
suit your training level.
- 6 -
How To Adjust Resistance Level (MagRide60-R)
(Fig. L)
Required Tool:
1 x M4 Hex Wrench
Hook
Lever
1
2
MagRide60-R comes with a convenient remote shifter device.
By installing it on your handlebar or stem, you can adjust the
resistance in 7 different levels without getting off the bike.
The remote shifter should be used in conjunction with the
gears on your bike to achieve maximum efficiency in your
workout.
How to install the remote shifter
1) Wrap the flexible plastic band around the handlebar,
2) Put the hook to the gutter on the plastic shifter base,
3) Flip up the lever to lock.
The remote shifter is pre-adjusted to fit the standard handlebar size;
22mm (7/8") diameter.
If it becomes loose or too tight, or you need to install the shifter
onto an oversized handlebar or stem, adjust the band length by
turning the plastic screw on the band with an M4 hex wrench.
(see Fig. O)
(Please be advised that the hex wrench doesn't come in the package)
!
The plastic band and screw are not made to be abused.
Do not over-tighten.
Unclip the remote before making adjustments.
(Fig. M)
(Fig. N)
(Fig. O)
How to increase the resistance level
Twist the shifter lever toward "H" symbol.
How to reduce the resistance level
Twist the shifter lever toward "L" symbol.
!
"L" is not zero resistance. There is still some resistance
even at "L" level due to the roller compression to the tire.
How To Adjust Resistance Level
Decrease
Increase
(Fig. P)
To Increase Resistance Level:
Slide the Dial Lever toward "H" position.
To Decrease Resistance Level:
Slide the Dial Lever toward "L" position.
Indicator Line
