- 3 -
6
7
Lay the temporarily
adjusted pillar down
on the floor.
Then, lift up the
pillar and loosen the
upper Pillar Joint,
and extend the Upper
Pillar toward the
ceiling.
(Fig. H)
When the Top
Rubber Cup
reaches the ceiling,
stop extending
the pillar and
temporarily tighten
the upper bolt to
keep this pillar
length.
You don't need
to compress the
spring in the Top
Rubber Cup yet.
Just touching the
ceiling is OK for
now.
This is the first
pillar length that
fits to your actual
room height.
You will adjust the
pillar to the final
size.
8
②
Extend
20mm more
①
Loosen
③
Tighten
Adjust the pillar length to the final size. (Fig. J)
①
Loosen the bolt on the upper Pillar Joint,
②
Extend the Upper Pillar
20mm more
,
③
Tighten both bolts on the upper Pillar Joint firmly
at
8 N.m
torque.
This is the final pillar length that will fit your room
perfectly.
8 N.m
9
Set the Lock Plates so the Center pillar is in the proper position
even if the bolts become accidentally loose.
Loosen
Move
Tighten
8 N.m
Loosen
Move
Tighten
8 N.m
Loosen the bolt on
the upper Lock Plate
and move upward
until it touches the
Upper Pillar.
Tighten the bolt
firmly at 8 N.m
torque to fix it.
Next, loosen the
bolt on the lower
Lock Plate and
move downward
until it touches the
Lower Pillar.
Tighten the bolt
firmly at 8 N.m
torque to fix it.
Now the pillar
length adjustment
is completed.
Loosen
Loosen
(Fig. H)
(Fig. I )
(Fig. K)
(Fig. L)
(Fig. J )
(Fig. M)
Extend
Temporarily
Tighten
