Minolta PAGEPRO PLUS, Руководство пользователя

Страница: 279 / 374

Problems During the Data Transfer and Print Cycle
7-4
Trou
bl
e
s
hoot
in
g
Cha
p
te
r
7
Troubleshooting the Print Cycle
Symptom Cause Action
The Data indicator
does not light up and
the printer does not
start a print cycle. The interface cable is
unplugged. Connect it securely.
☞
“Set-up Guide”
The interface cable
may not be compati-
ble with the specifica-
tions of the computer
and/or printer. Check the model code
and specifications of
the interface cable and
make sure that they
are compatible with
the specifications of
the computer and
printer.
☞
“Set-up
Guide”
The Message indica-
tor lights up and the
print cycle does not
start. The printer has
detected an error. The
details of the error are
shown on the message
display. To determine the nec-
essary remedy,
☞
page 7-6.
The print cycle cannot
be interrupted (the
Data indicator
remains on). Data is stored in the
printer’s memory. Press the On Line key
to take the printer off
line. From the Reset
Menu run “Job &
Memory” to reset the
data stored in the
memory. Details
☞
Chapter 3
Personality does not
change. “Personality” in the
“Config Menu” is not
set to “Automatic.” Press the On Line key
to take the printer off
line. Change the “Per-
sonality” setting in the
Config Menu to
“Automatic.”
Details
☞
p. 3-11
CPP_Plus.book Page 4 Tuesday, July 20, 1999 9:02 AM