18
4.2.21 Beep Sound
This
menu allows you to enable or disable the button press “beep” sounds.
1. In Capture Mode press the
MENU
button. Select
‘Beep Sound’
by using the
UP
or
DOWN
buttons to scroll through the menu pages.
2. Press the
OK
button
to enter the
‘
Beep Sound
’
submenu.
3. Press the
UP
or
DOWN
buttons again to navigate the submenu and select a setting.
You can select from
Enable
and
Disable.
4. Press the
OK
button to confirm your selected setting.
5. To exit the settings menu, press the
MENU
button and your camcorder will return to
Capture Mode and will automatically begin recording.
4.2.22 Language
This settings allows you to set the language of the dashcam menu.
1. In Capture Mode press the
MENU
button. Select
‘Language’
by using the
UP
or
DOWN
buttons to scroll through the menu pages.
2. Press the
OK
button
to enter the
‘Language’
submenu.
3. Press the
UP
or
DOWN
buttons again to navigate the submenu and select a setting.
Press the
OK
button to confirm your selected setting.
4. To exit the settings menu, press the
MENU
button and your camcorder will return to
Capture Mode and will automatically begin recording.
4.2.23 Frequency
This setting allows you to set the power frequency of your camcorder and is dependent on
the region that the camcorder is being used in.
1. In Capture Mode press the
MENU
button. Select
‘Frequency’
by using the
UP
or
DOWN
buttons to scroll through the menu pages.
2. Press the
OK
button
to enter the
‘Frequency’
submenu.
3. Press the
UP
or
DOWN
buttons again to navigate the submenu and select a setting.
You can select from
50 Hz
and
60 Hz.
The setting for North America is
60Hz
.
4. Press the
OK
button to confirm your selected setting.
5. To exit the settings menu, press the
MENU
button and your camcorder will return to
Capture Mode and will automatically begin recording.