E21
Data Retrieval
E20
Recalling Photographic Data to the Camera Display
1. Attach the Data Saver DS-100 to the camera
and slide the main switch to ON.
• The ACCESS lamp (green) will come on in
approximately 8 seconds.
• When the DS-100 has a defective SmartMedia , the
ACCESS lamp will be red and the Data Full lamp
(yellow) will blink rapidly, When this happens, data
cannot be displayed.
2. Follow the camera’s instructions and recall
the data.
• For the Maxxum/Dynax 7, press the DATA button on the
control panel.
• The method of displaying the data may differ, depending
on the camera.
FILM DATA NUMBER
In order to identify the photographic data with the developed film, the data num-
ber is exposed on the “0” frame when the film cartridge is loaded into the cam-
era (providing data memory has been selected). Each time another roll of film is
loaded, the data number increases by 1.
• For more information on data numbers, refer to your camera’s manual.
Film leader
Data number
Data number
Photographic data stored in the SmartMedia cards, can be displayed on your
camera’s display.
