Minolta DIMAGE SCAN ELITE, Инструкция по эксплуатации

Страница: 82 / 85

80
TROUBLE SHOOTING
• Load film into the film holder.
• Scanner door opened during setup. Close
scanner door.
The computer will not start up
after connecting the scanner. • Shut down the computer and all the devices in
your SCSI chain, then check the SCSI cables,
SCSI ID connection, power cord, and SCSI ID.
DS_Elite does not appear in
the Import drop down list. • Make sure the plug-in module has been
placed in the correct folder. See page 12.
“Could not establish
connection with scanner.” • Indicator lamp is off - Turn the Dimâge Scan
Elite on, then restart your system.
• Check that the SCSI ID is not being used by
another SCSI device.
“Setting up now. Remove the
film holder.” • Remove the film holder and click on OK.
“Set film properly…”
Indicator lamp blinking
rapidly (8Hz).
“Set 35mm film holder
properly.” • Set the correct film type.
“Set APS film holder properly.” • Set the correct film type.
“Could not recognize the
film type.” • Set the film type manually.
“Insufficient Memory” • Increase the memory requirements for the
host application.
• If you have scanned multiple images, close
and relaunch the host application.
“Setting up now. Remove
the film holder.” appears
when the film holder is not
loaded. • Contact a Minolta Service Facility to change
the fluorescent lamp.
SYMPTOM or MESSAGE SOLUTION