Changing the lithium-ion battery
To remove the battery, move the latch towards the back of
the camera until the battery is released (5). Pull the bat-
tery out of the chamber (6).
This digital camera uses one NP-200 lithium-ion battery. Before using the battery, read the safety
warnings on pages 3 and 4 of this manual. When replacing the battery, the camera should be turned
off.
Close the battery-chamber door (7) and slide it toward
the top of the camera to engage the safety catch (8).
• After installing the battery, the set-time/date message
may appear on the monitor. The clock and calendar is
set in the setup 1 section of the menu (p. 18). An
internal battery protects the clock, calender, and
memory settings for more than 24 hours if the camera
is used for at least 5 minutes before removing the
battery.
13
1
2
4
6
7
8
3
5
Move the battery latch towards the back of the camera to
insert the battery (3). Slide the battery into the battery cham-
ber (4) with the battery terminals first until it is caught by the
latch.
Slide the battery-chamber door toward the bottom of the camera to
release the safety catch (1). Open the door (2).
Содержание Dimage Dimage Xi
Страница 1: ...INSTRUCTION MANUAL E 9222 2783 11 SY A209...
Страница 59: ......