Minolta DIMAGE 7I - SOFTWARE, Инструкция по эксплуатации

Страница: 41 / 41

81 80
AUTOFOCUS MODES
• Do not confuse these icons with the metering-mode icons (p. 47).
• The shutter can be released even if the camera cannot focus on the subject.
Focus icon: red - Cannot focus. The subject is too close or a special situation is
preventing the AF system from focusing.
Continuous AF icon - Focus confirmed.
Single AF icon - Focus confirmed.
This digital camera has two autofocusing modes. The single and continuous AF are
selected in the basic section of the recording-mode menu (p. 78).
Single AF - for general purpose photography and static subjects. When the shutter-
release button is pressed partway down, the autofocus system locks onto the subject in
the focus area and will remain locked until the shutter button is released.
Continuous AF - for moving subjects. When the shutter-release button is pressed
partway down, the autofocus system will activate and continue to focus until the
exposure is made.
• When using continuous AF with the wide focus area (p. 74), the AF sensors used to indicate
the point of focus will not be displayed.
• The continuous AF mode may have difficulty focusing on extremely fast subjects. In this
situation, use manual focus to focus on a point in the subject’s path and release the shutter
just before the subject reaches that point; there is a slight delay between the time the
shutter-release button is pressed and the shutter opens.
• Direct Manual focus (p. 131) can be used with single AF.
R
ECORDING MODE
ELECTRONIC KEYBOARD
The electronic keyboard is used to enter text for imprinting data or for naming new
folders. The keyboard automatically appears when text needs to be entered.
To enter text,
simply use the
four-way keys
of the controller
to highlight the
desired character and
then press the central
button of the controller to enter
it. Entering the case key will
switch between upper and
lower case; the change is
immediately displayed on the
keyboard. When complete,
highlight the enter key and
press the controller to enter the
text and complete the
operation. To cancel the
operation, press the menu
button.
To delete text, move the cursor into the text block at the top of the screen. Use the
cursor to highlight the character to be deleted. Press the down key; the delete key will
be highlighted. Press the center of the controller to delete the character.
To replace a character, repeat the previous procedure, but when the delete key is
highlighted, use the four-way keys to highlight the character to replace the one
highlighted in the text box; press the controller to replace the character.
Text block Delete key Case key
Enter key
Rec. Text input
select enter