Minolta Di200, Расширенная информация

Страница: 191 / 250

Troubleshooting 6
Di200 6-1
6 Troubleshooting
6.1 If you are not satisfied with your copy.. .
Symptom Possible cause Action
The image is too
light.
The exposure level for the
Auto Exposure Mode is set
to a light value. Change the Copy Density in
the User's Choice,
see page 5-10.
Manually set the exposure
to a darker level, page 45.
The exposure level has
been manually set too light. Manually set the exposure
to a darker level, page 4-45.
You have previously made
copies from a very dark
original. The copier requires toner
replenishment;
page 5-28.
The toner bottle has just
been replaced.
The message Please
Replenish Toner is shown
on the display.
Replace the toner bottle;
see page 2-38
The paper is damp. Replace the paper.
The image is too
dark.
The exposure level for the
Auto Exposure Mode is set
on a dark value. Change the Copy Density in
the User's Choice,
see page 5-10.
Manually set the exposure
to a lighter level, see page 4-
45.
The exposure level has
been manually set too dark. Manually set the exposure
to a lighter level, see page 4-
45.
The entire surface of the
original glass is dirty. Clean the original glass, see
page 7-1.
The original is not flat
against the original glass. Place the original on the
original glass correctly; see
page 3-15.