Minolta CN3102Pro, Руководство пользователя

Страница: 23 / 46

Using the Scanner Mode 2
CN3102Pro 2-5
2.2 Controller Setup Items
The following settings must be made on the controller side to use the
scan function.
Network Protocol Settings
Network communications using the TCP/IP protocol must be possible.
Use the [Setup Mode] on the controller operation to enter the settings.
For details on the setup items and procedure, see the Controller User
Manual.
Scan Settings
Use the [Setup Mode] on the controller operation panel to enter the
settings.
* ×: required
* 1: The From address is Fiery Email User Name@Fiery Email Domain Name. Normally, the e-
mail address of the controller is specified. (See p. 2-11.)
* 2: Administrator Email User Name@Administrator Email Domain Name is the error
notification destination if the mail does not reach the recipient for some reason. (See p.
2-11.) However, if the mail is not transmitted, the error is not notified.
Controller
Operation Panel Scan to E-mail Scan to Mailbox
Setup Mode: [Network Setup] — [Service Setup] — [E-Mail Setup]
Enable E-mail Services × —
Enable Print Via E-mail — —
Outgoing Server × —
Incoming Server — —
Server Type — —
Fiery Email User Name ×*
1
—
Fiery Email Domain Name ×*
1
—
Account Name — —
Password — —
Administrator Email User Name ×*
2
—
Administrator Email Domain Name ×*
2
—
Timeout (Sec) × —
Polling Interval — —
Maximum Scan File Size × —