Minolta CL-200, Инструкция по эксплуатации

Страница: 21 / 56

19
7. Press [
䊳
/D-OUT ] as necessary, so that the digit you want to set
next starts blinking (becomes active).
8. Press [
▲
] or [
▼
] as necessary to change the value of the active
digit.
9. Repeat steps 7 and 8 as necessary to set values for all digits.
◆
When you have entered values for all digits, the entire
value (all digits) will blink.
●
You can cancel the entry procedure by pressing [ CALL ].
5. Press [
䊳
/D-OUT ].
◆
One or more decimal points begin blinking.
●
If a target value is already set for this parameter, the
value is displayed. The value’s decimal point blinks.
●
If the set target value does not have a set decimal point,
all three of the line’s decimal points blink.
6. Press [
▲
] or [
▼
] as necessary to select the number of significant
digits for the selected parameter.
●
If you use the [
▲
] key, the number of digits changes as
shown in the illustration. If you use the [
▼
] key, the ac-
tion moves in the reverse direction.
●
When you are ready to move to another line, return to Step 4.
To enter a value for Ev, x, y, or z