7
6
CAMERAS AND FLASH UNITS
This flash unit is designed and manufactured solely for use with
the Minolta Maxxum/Dynax series cameras. It cannot be attached
to other Minolta cameras. Performance when used with cameras
from other manufacturers cannot be guaranteed. Minolta takes no
responsibility for accidents or malfunctions due to use with such
cameras.
The information in this manual is relevant for products introduced
before August 2000. Contact the nearest authorized Minolta
Service Facility to obtain information for products released after
this date.
This mark below the flashtube certifies that this prod-
uct meets the requirements of the EU (European
Union) concerning interference causing equipment
regulations. CE stands for conformité Européenne
(European conformity).
Cameras
This manual covers the PROGRAM/MAXXUM FLASH 5600HS (D)
as attached to one of the following cameras.
Maxxum
9, 7, 800si, 700si, 600si, 400si, 300si, XTsi, HTsi, STsi, QTsi
Dynax
9, 7, 800si, 700si, 600si, 505si, 505siSuper, 500si, 500siSuper,
404si, 303si, 300si
When attaching to another Maxxum series camera, a Dynax series
camera, a Vectis series camera, or a Dimâge series digital camera,
read the main section of this manual while referring to ‘Use in
Combination with Other Products’ on page 69.
Flash Units
For convenience, classify the following as D flash units when using
multiple flash units for wireless flash photography, etc.
MAXXUM/PROGRAM FLASH 5600HS (D)
MAXXUM/PROGRAM FLASH 3600HS (D)
