MINOLTA-QMS PagePro 4100 Series, Руководство по обслуживанию

Страница: 16 / 126

1
1. INSTALLATION
1-1. Installation Environment
When installing the printer, avoid the types of locations listed below, both for safety
considerations and to avoid breakdowns.
•Areas with high temperatures or humidity, or with low temperatures and humidity
•Areas where the temperature and/or humidity fluctuate sharply
•Areas where the printer will be in direct sunlight
•Areas near a cooler, heater, or ventilation opening or in the direct path of wind
•Areas near oil stoves or other heat-generating equipment
•Areas with poor ventilation
•Areas where water is likely to fall on the equipment or electrical leakage is likely
•Areas where corrosive gases (ammonia gases, etc.) are present
•Areas where there is a high volume of dust, dirt and vibration
•Areas where the floor is not sufficiently strong or is not level
•Areas containing volatile and flammable materials and curtains
1-2. Usage Environment
In order to make sure the printer functions properly, make sure the ambient environment
satisfies the following requirements:
1-3. Installing the Power Supply
Do not plug the Power Cord into a power outlet via an extension cord supplying
electricity to more than one unit. Do not connect the printer to a power outlet used for
other equipment or appliances.
More than one appliance connected to a single outlet could cause a drop or surge in the
electrical supply, resulting in operational problems for the printer.
The following items should be checked periodically:
•Make sure the power supply plugs do not feel warm.
•Power supply cords should be free of cracks and scratches.
•Power supply plugs should be firmly plugged into outlets.
•Temperature: 10-35°C, or 50-95°F Temperature fluctuation: ±10°C, or ±50°F
per hour or less
•Humidity: 35-70% RH Humidity fluctuation: ±20% RH per hour or less
•Voltage fluctuation: Specified voltage: ±10%
•Frequency fluctuation: Specified frequency: ±3Hz