MINOLTA-QMS Crown Document Option Commands, Справочное руководство

Страница: 67 / 134

Selecting Printer Features 67
2
Place the disk in the printer’s floppy disk drive.
3
Access the “Install Option” in the “Disk Operations” menu on the printer configura-
tion menu.
Testing Your Background
To test the background, first create a PostScript test file that prints the background on a
blank page. Then send the test file to the printer. If anything shows up on the page, it’s
from the background file.
1
Create the test file in any text editor.
2
Type the following test file.
%!
%%Title: Background Test Routine!
%%IncludeFeature: emulation(postscript)
%%IncludeFeature: background(SYS:/usr/filename.ext *
sheet) %%EndComments
showpage
%%EOF
3
Replace the filename.ext with the actual filename of your previously downloaded
background.
4
Save the test file as text only.
5
Print the test file.
Use the instructions in “Printing a Background” on page 71.
Placing a Background Command in the Foreground
The background command prints the image in a printer-resident file as a background on
your document. A background file can contain only one background image. However,
there can be multiple background commands in the DOC header of the foreground file.
Use any of the following ways to place a background command/s in your foreground:
Use a text editor or a word-processing program (the file must be saved as text only) to
place a DOC header in your foreground document.