MINOLTA-QMS Crown Document Option Commands, Справочное руководство

Страница: 118 / 134

Selecting Emulation Features 118
Margins
The lpmargins command defines the usable area of the logical page in which printing
takes place (logical page margins are established separately by the margins command).
The following applies to left, top, right, and bottom margins:
Form Feeds
The ffiscrff command translates each form feed in the job's data stream to a carriage
return/form feed combination.
CCITT Group 3 and 4
The new DPI command for CCITT groups 3 and 4 is supported on your printer. All
supported CCITT commands are outlined in chapter 5, “Emulations,” of your system
administrator’s guide.
ImageData
The %%ImageData command instructs the emulation to begin decompression of the
image data using the currently set image options.
Syntax %%IncludeFeature: lpmargins (< left> <top> <right> <bottom>)
<left>
<top>
<right>
<bottom>
0.5 - 50000 centipoints (approximately 7 inches).
Units of
measure
Margins are expressed in centipoints (1/100 of a point). One inch = 7200 centi-
points.
Default
0 for all margins
Syntax %%IncludeFeature: ffiscrff (< value>)
<value>
on | off
Default Determined by printer control panel setting.
Syntax %%ImageData (< setting>)
<setting> true | false
Default false