Minnich A-1-24, Руководство оператора и сервисное руководство

Страница: 16 / 28

Dowel Drill Manual
16
STEP OPERATION
Be sure lubricator is full. See recommended oils below.
Make sure slab wheels are square against face of slab.
Using feed control valve, feed bit against slab.
Using drill control valve, turn drill on and drill until the
drill slider is against the stop clamp, which should be
set for the required depth of hole.
Once drill slider is against the stop clamp, leave the
drill on and use the feed control valve to retract the
drill from the hole. Note: If bit will not retract from hole,
feed drill back into hole and retract drill again.
Step 1
Step 2
Step 3
Step 4
Step 5
DO NOT hit drill slider to retract the bit from
the hole. This will damage the drill slider.
Bio-Rock Drill™ Oil 15W50
R e n e w a b l e
L u b r i c a n t s
Minnich recommended rock drill lubricant